Miller Bearing Catalog Page 10

~ PAGE 10 ~

FR-Series

This product may also be offered in
Stainless Steel
Call for availability

Bearing Number	A Dimension	B Dimension	C Dimension	D Dimension	E Dimension	Bore *	Load Rating
FR-1598-7HDS	1.598	0.453	7/32	43/64	1.700	7/16" Hex	428#
FR-1598-7H-1DS	1.598	0.593	11/32	15/16	1.700	7/16" Hex	428#
FR-1598-7HEDS	1.598	0.453	3/16	41/64	1.700	7/16" Hex	428#
FR-1598-7HFDS	1.598	0.422	19/64	23/32	1.700	7/16" Hex	428#
FR-1625-7HDS	1.625	0.453	7/32	43/64	1.740	7/16" Hex	428#
FR-1625-7H-1DS	1.625	0.593	11/32	15/16	1.740	7/16" Hex	428#
FR-1625-7HEDS	1.625	0.453	3/16	41/64	1.740	7/16" Hex	428#
FR-1625-7HFDS	1.625	0.422	19/64	23/32	1.740	7/16" Hex	428#
FR-1665-7HDS	1.665	0.453	7/32	43/64	1.770	7/16" Hex	428#
FR-1665-7H-1DS	1.665	0.593	11/32	15/16	1.770	7/16" Hex	428#
FR-1665-7HEDS	1.665	0.453	3/16	41/64	1.770	7/16" Hex	428#
FR-1665-7HFDS	1.665	0.422	19/64	23/32	1.770	7/16" Hex	428#
FR-1707-5DS	1.707	0.453	7/32	43/64	1.812	5/16" Round	428#
FR-1707-5HDS	1.707	0.453	7/32	43/64	1.812	5/16" Hex	428#
FR-1707-7HDS	1.707	0.453	7/32	43/64	1.812	7/16" Hex	428#
FR-1707-7H-1DS	1.707	0.593	11/32	15/16	1.812	7/16" Hex	428#
FR-1707-7HEDS	1.707	0.453	3/16	41/64	1.812	7/16" Hex	428#
FR-1707-7HFDS	1.707	0.422	19/64	23/32	1.812	7/16" Hex	428#
FR-1707-8DS	1.707	0.453	7/32	43/64	1.812	1/2" Round	428#

*DUE TO NORMAL WEAR; IT IS BEST TO MEASURE SHAFT SIZE WHEN DETERMINING BORE DIMENSION

A Dimension tolerance = +0.010/-0.000, B and E Dimension tolerance = 0.010/-0.010

FEATURES:

	The above bearings have 8- 17/64" Diameter balls and retainer.
	The above bearings are produced with a 16 teeth per inch knurl on the outside body of the bearing, (A Dimension), to assist in the assembly of the roll.
	S following the bearing number designates a front seal.
	DS following the part number designates a front and a back seal. The DS is standard on the FR Series.
	These bearings may be ordered with either light oil or greased packed lubricant.