~ PAGE 4 ~

FC-Series

Bearing Number	A Dimension	A1 Dimension	B Dimension	C Dimension	D Dimension	E Dimension	Bore *	Load Rating
F-1710-7H	1.715	1.670	33/64	1/4	47/64	1.800	7/16" Hex	180#
FC-1710-7H	1.715	1.670	33/64	1/4	47/64	1.800	7/16" Hex	252#
FCR-1710-7H	1.715	1.670	33/64	1/4	47/64	1.800	7/16" Hex	304#
FH-1775-7H	1.775	N/A	35/64	7/32	49/64	1.900	7/16" Hex	180#
FC-1775-7H	1.775	N/A	35/64	7/32	49/64	1.900	7/16" Hex	252#
FCR-1775-7H	1.775	N/A	35/64	7/32	49/64	1.900	7/16" Hex	304#

*DUE TO NORMAL WEAR; IT IS BEST TO MEASURE SHAFT SIZE WHEN DETERMINING BORE DIMENSION

A and A1 Dimension tolerances = +0.010/-0.000

FEATURES:

	F & FH bearings have 12- 9/32" diameter balls.
	FC bearings have 13- 17/64" diameter balls.
	*FCR* bearings come with 8- 17/64" diameter balls and a ball retainer for higher speed applications. Note: The FCR-1710 bearings will have either a BLUE or BLACK shield.
	Bearings above have a plastic insert which acts to quiet the bearing, also allowing it to be re-greased.
	M at the beginning of the part number designates an all metal inner race.
	The patented rib feature (1710's only) allows this bearing to be pressed into the roll without any secondary operation.
	S added to the end of the part number designates a felt seal added to the front of the bearing.
	T added to the end of the part number designates a Teflon seal added to the front of the bearing.